Garmin 2610 Benutzeranleitung

Seite von 95
Introduction
2
Maintenance
Caring for your StreetPilot 
Cleaning the Case and Remote Control
The StreetPilot 2610/2650 case and remote are constructed of high quality materials and do not require 
user maintenance other than cleaning. Clean the unit’s outer casing (except for the touchscreen) using a 
cloth dampened with a mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents 
that may damage plastic components.
Cleaning the Touchscreen
The StreetPilot 2610/2650 touchscreen is intended primarily for finger operation. Although a PDA stylus 
may also be used to operate touchscreen, never attempt this while operating a vehicle. Never use a hard or 
sharp object to operate the touchscreen or damage may result. The touchscreen should be cleaned using a 
soft, clean, lint-free cloth. Water, isopropyl alcohol, or eyeglass cleaner can be used if needed. If these are 
used, apply the liquid to the cloth and then gently wipe the touchscreen with the moistened cloth.
Storage
Do not store the StreetPilot 2610/2650 where prolonged exposure to temperature extremes may occur 
(such as in the trunk of a car) as permanent damage may result. User information such as waypoints and 
routes are retained in the unit’s memory without the need for external power. Back up important user data 
by manually recording it or downloading it to a PC (transferring it to MapSource).
Storing alkaline batteries in the remote control for extended periods is not recommended. In order to 
reduce the chance for battery leakage in the battery compartment, remove the batteries when storing the 
remote control for more than six months.