Fortinet fortigate-200a Installationsanweisungen

The following procedures use both the web-based manager and the CLI. 
However, it is recommended you use the CLI since the login screen may appear 
before the installation is complete. The FortiGate unit may reboot twice if installing 
the firmware image and configuration file. 

Go to System > Maintenance > Backup and Restore. 

Select the blue arrow to expand the Advanced options. 

Select the following:
• On system restart, automatically update FortiGate configuration file if default 

file name is available on the USB disk.

• On system restart, automatically update FortiGate firmware image if default 

image is available on the USB disk. 

Enter the configuration and image filenames or use the default configuration 
filename (system.conf) and default image name (image.out). 

The default configuration filename should show in the Default configuration file 
name field.

Select Apply. 

Log into the CLI. 

Enter the following command: 

config system auto-install

set default-config-file <filename>
set auto-intall-config {enable | disable}
set default-image-file <filename>
set auto-install-image {enable | disable}

end

Enter the following command to see the new firmware installation settings:

get system status

Use the following CLI commands when you want to delete a file from the FortiUSB 
key, list what files are on the key, including formatting the key or renaming a file: 

• exec usb-disk list
• exec usb-disk delete <filename>
• exec usb-disk format
• exec usb-disk rename <old_filename1> <old_filename2>

Note: You need an unencrypted configuration file for this feature. Also the default files, 
image.out and fgt_system.conf, must be in the root directory. 

Note: Make sure at least FortiOS v3.0MR1 is installed on the FortiGate unit before 
installing.