Fortinet fortigate-200a Betriebsanweisung

If both VPN peers can use the same preshared key to authenticate themselves to 
each other, you can enter the preshared key at each peer.

Add a phase 1 configuration to define the parameters used to authenticate the remote 
VPN peer. 

Although the remote VPN peer can be either a client or a gateway, this step is often 
referred to as “adding a remote gateway.” 
For a preshared key VPN, set authentication method to Preshared key.

Set other phase 1 options as required.

See 

.

Add the phase 2 configuration to define the parameters used to create and maintain 
the AutoKey VPN tunnel. 

This step is often referred to as “adding a tunnel.” See 

Add the firewall configuration required for the VPN.

See 

Using a peer to peer VPN, users on a network behind a VPN gateway can connect to 
another remote network behind a remote VPN gateway. Both VPN gateways or peers 
are FortiGate units or other VPN gateways with static IP addresses.

Add a phase 1 configuration to define the parameters used to authenticate the remote 
VPN peer. 

Set Remote Gateway to static.

Set other phase 1 options as required.

See 

.

Add the phase 2 configuration to define the parameters used to create and maintain 
the AutoKey VPN tunnel.

See 

.

Add the firewall configuration required for the VPN.

See 

Configure remote VPN clients with a matching IPSec VPN configuration.