Fortinet fortigate-200a Betriebsanweisung

Go to Log&Report > Log Config > Log Setting.

Select the check box to enable logging to a location.

Select the blue arrow beside the location.
The setting options appear.

Enter the settings the logging location requires.

Repeat steps 2 through 8 to configure other logging locations.

Select Apply.

 describes the FortiGate logging severity levels.

The FortiGate system memory. The FortiGate system memory has a limited 

capacity and only displays the most recent log entries. Traffic and content 

logs cannot be stored in the memory buffer. When the memory is full, the 

FortiGate unit begins to overwrite the oldest messages. All log entries are 

deleted when the FortiGate unit restarts.

A remote computer running a syslog server. 

A remote computer running a NetIQ WebTrends firewall reporting server. 

FortiGate log formats comply with WebTrends Enhanced Log Format (WELF) 

and are compatible with NetIQ WebTrends Security Reporting Center 2.0 and 

Firewall Suite 4.1.

IP:

The IP address of the FortiLog unit that manages the logs.

Level:

The FortiGate unit logs all messages at and above the logging severity 

level you select. For example, if you select Error, the unit logs Error, 

Critical, Alert and Emergency level messages. See 

.

Enable encryption

Select to enable encryption of file transfer.

Local ID:

The identifier for the FortiGate unit. This must match the device name 

assigned to this unit on the FortiLog unit.

Pre-shared key

The pre-shared key used for encryption.