Fortinet fortigate-5001a Betriebsanweisung

The FortiGate-5001A-DW includes one AMC double-width slot filler that must be 
installed in the double-width AMC slot if you do not have a FortiGate ADM module. 
Either a filler or an AMC module must be installed for proper cooling air flow.

To complete this procedure, you need:

• FortiGate-5001A board with an empty AMC slot
• An electrostatic discharge (ESD) preventive wrist strap with connection cord

Attach the ESD wrist strap to your wrist and to an ESD socket or to a bare metal 
surface on the chassis or frame.

Eject the FortiGate-5001A board from the chassis slot.

Completely open the FortiGate-5001A left handle.

Pull the latch on the slot filler front panel to the extended position.

Insert the slot filler by applying moderate force to the front faceplate to slide the 
slot filler into the opening.
The slot filler should glide smoothly into the opening. If you encounter any 

resistance while sliding the slot filler in, the slot filler could be aligned incorrectly. 

Pull the slot filler back out and try inserting it again.

Press the latch in the slot filler front panel to lock in the slot filler.

The following steps describe how to install an AMC module into your 
FortiGate-5001A board. 

Insert the fiber transceivers into the module before inserting the module into the 
FortiGate unit. For details on installing the transceivers, see the 

for the module.

Caution: FortiGate-5001A boards must be protected from static discharge and physical 
shock. Only handle or work with FortiGate-5001A boards at a static-free workstation. 
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when 
handling FortiGate-5001A boards.

Note: When closed, the FortiGate-5001A left handle blocks the AMC opening. You must 
eject the FortiGate-5001A board from its chassis slot and completely open the left handle 
before inserting or removing AMC modules or slot fillers.

Note: When closed, the FortiGate-5001A left handle blocks the AMC opening. You must 
eject the FortiGate-5001A board from its chassis slot and completely open the left handle 
before inserting or removing AMC modules or slot fillers.

Caution: Because the FortiGate-5001A board does not support hot swapping AMC 
modules, the FortiGate-5001A board must be disconnected from power and the left handle 
opened before you install a FortiGate AMC module.