Fortinet fortigate-5001a Betriebsanweisung

 lists and describes the FortiGate-5001A connectors.

Green

Fabric backplane interface 1 (fabric2) is connected at 1 

Gbps.

Flashing 

Green

Network activity at fabric backplane interface 1.

Off or 

Flashing 

green

The ACC LED flashes green when the FortiGate-5001A 

board accesses the FortiOS flash disk. The FortiOS flash 

disk stores the current FortiOS firmware build and 

configuration files. The system accesses the flash disk when 

starting up, during a firmware upgrade, or when an 

administrator is using the CLI or GUI to change the FortiOS 

configuration. Under normal operating conditions this LED 

flashes occasionally, but is mostly off.

Off

Normal operation.

Green

A fault condition exists and the FortiGate-5001A blade is out 

of service (OOS). This LED may also flash very briefly during 

normal startup.

Green

The FortiGate-5001A board is powered on.

Green

The FortiGate-5001A board is powered on.

Flashing 

Green

The FortiGate-5001A is starting up. If this LED is flashing at 

any time other than system startup, a fault condition may 

exist.

Blue

The FortiGate-5001A is ready to be hot-swapped (removed 

from the chassis). If the IPM light is blue and no other LEDs 

are lit the FortiGate-5001A board has lost power

Flashing 

Blue

The FortiGate-5001A is changing from hot swap to running 

mode or from running mode to hot swap. This happens when 

the FortiGate-5001A board is starting up or shutting down.

Off

Normal operation. The FortiGate-5001A board is in contact 

with the chassis backplane.

RJ-45

10/100/1000 

Base-T

Ethernet

Copper gigabit connection to 

10/100/1000Base-T copper networks.

CONSOLE RJ-45

9600 bps

RS-232 

serial

Serial connection to the command line 

interface.

USB

FortiUSB key firmware updates and 

configuration backup.