Fortinet fortigate-200a Betriebsanweisung

Go to Router > RIP > Interface.

Select the edit icon beside an Interface to configure that interface.

Select a Send Version if you want to override the default send version for this 
interface.

Select a Receive Version if you want to override the default receive version for this 
interface.

Select the Split-Horizon check box to enable split horizon.

Select either Regular or Poisoned reverse to set the split horizon type.

Select the Authentication mode.

Select Password and enter a password (key) if this interface is using RIP version 2 
and if you are configuring only one key for this interface and do not want to use a key 
chain.

Select Key-chain and select the key chain to use if this interface is using RIP version 2 
and you want to use key chains for authentication for this interface.

Select OK.

Use distribute lists to filter incoming or outgoing updates using an access list or a 
prefix list. If you do not specify an interface, the filter will be applied to all interfaces in 
the current virtual domain.

You must configure the access list or prefix list that you want the distribute list to use 
before you configure the distribute list. For more information on configuring access 
lists and prefix lists, see 

 and 

Enter a password (key) to use for authentication for RIP version 2 

packets sent and received by this interface. Enter a password here when 

you only want to configure one key. The key can be up to 35 characters 

long.

Enter the name of the key chain to use for authentication for RIP version 

2 packets sent and received by this interface. Use key chains when you 

want to configure multiple keys. For information on how to configure key 

chains, see 

.

Note: By default, all distribute lists for the root virtual domain are displayed. If you create 
additional virtual domains, the distribute lists belonging to the current virtual domain only are 
displayed. To view the settings associated with a different virtual domain, go to System > Virtual 
Domain > Virtual Domains and select the virtual domain.