Fortinet fortigate-200a Betriebsanweisung

After configuring an interface to be a DHCP server (using the procedure 

), you must configure a DHCP server for 

the interface.

Go to System > DHCP > Server.

Select Create New.

Enter a name for the DHCP server configuration.

Select the interface for which to configure the DHCP server.

Enter the domain that the DHCP server assigns to DHCP clients.

Enter the IP address of the default gateway that the DHCP server 

assigns to DHCP clients.

Enter the starting IP and ending IP for the range of IP addresses that this 

DHCP server assigns to DHCP clients.

Enter the netmask that the DHCP server assigns to DHCP clients.

Select Unlimited for an unlimited lease time or enter the interval in days, 

hours, and minutes after which a DHCP client must ask the DHCP server 

for new settings. The lease time can range from 5 minutes to 100 days.

Enter the IP addresses of up to 3 DNS servers that the DHCP server 

assigns to DHCP clients. 

Add the IP addresses of one or two WINS servers that the DHCP server 

assigns to DHCP clients.

Up to three custom DHCP options that can be sent by the DHCP server. 

Code is the DHCP option code in the range 1 to 255. Option is an even 

number of hexadecimal characters and is not required for some option 

codes. For detailed information about DHCP options, see RFC 2132, 

DHCP Options and BOOTP Vendor Extensions.