Fortinet fortigate-200a Betriebsanweisung

Go to System > Config > Time.

Select Refresh to display the current FortiGate system date and time.

Select your Time Zone from the list.

Optionally, select Automatically adjust clock for daylight saving changes check box.

Select Set Time and set the FortiGate system date and time.

Set the hour, minute, second, month, day, and year as required.

Select Apply.

Go to System > Config > Time.

Select Synchronize with NTP Server to configure the FortiGate unit to use NTP to 
automatically set the system time and date.

Enter the IP address or domain name of the NTP server that the FortiGate unit can 
use to set its time and date.

Specify how often the FortiGate unit should synchronize its time with the NTP server. 

Select Apply.

Go to System > Config > Options to set the following options:

• Timeout settings including the idle timeout and authentication timeout
• The language displayed by the web-based manager
• Dead gateway detection interval and failover detection

Select the Automatically adjust clock for daylight saving changes check 

box if you want the FortiGate system clock to be adjusted automatically 

when your time zone changes to daylight saving time and back to 

standard time. 

Select Set Time to set the FortiGate system date and time to the correct 

date and time.

Select Synchronize with NTP Server to configure the FortiGate unit to 

use NTP to automatically set the system date and time. For more 

information about NTP and to find the IP address of an NTP server that 

you can use, see http://www.ntp.org.

Enter the IP address or domain name of the NTP server that the 

FortiGate unit can use to set its time and date.

Specify how often the FortiGate unit should synchronize its time with the 

NTP server. A typical Syn Interval would be 1440 minutes for the 

FortiGate unit to synchronize its time once a day.