Fortinet fortigate-200a Installationsanweisungen

Note that these policies allow all traffic through. No protection profiles have been 
applied. Ensure you create additional firewall policies to accommodate your 
network requirements.

Your FortiGate unit is now configured and connected to the network. To verify the 
FortiGate unit is connected and configured correctly, use your web browser to 
browse a web site, or use your email client to send and receive email.

If you cannot browse to the web site or retrieve/send email from your account, 
review the previous steps to ensure all information was entered correctly and try 
again.

Remember, to verify the firewall policies. The firewall policies control the flow of 
information through the FortiGate unit. If they are not set up correctly, or are too 
restrictive, it can prohibit network traffic.

Once you have determined your FortiGate is configured and working correctly, it 
is extremely important that you back up your configuration. By backing up the 
configuration, you ensure that if you need to reset the FortiGate unit for whatever 
reason, you will be able to quickly return it to operation with minimal effort.

Go to System > Maintenance > Backup & Restore.

Select to back up to your PC or to a USB key.

The USB Disk option will be grayed out if the FortiGate unit supports USB disks 
but none are connected.

Select Encrypt the backup file.

Encryption must be enabled on the backup file to backup VPN certificates.

Enter a password and enter it again to confirm it. You will need this password to 
restore the file.

Select Backup.

The web browser will prompt you for a location to save the configuration file. The 
configuration file will have a .conf extension.

It is a good practice to backup the FortiGate configuration after any modification to 
any of the FortiGate settings. Alternatively, before performing an upgrade to the 
firmware, ensure you backup the configuration before upgrading. Should anything 
happen during the upgrade that changes the configuration, you can easily restore 
the saved configuration.