Fortinet fortigate-5001a Hardwarehandbuch

The FortiGate-5020 chassis is a 4U chassis that can be installed in a standard 
19-inch rack. 

Table 3

 describes the physical characteristics of the FortiGate-5020 

chassis.

The FortiGate-5020 chassis must be mounted in a standard 19-inch rack. The 
chassis requires 4U of vertical space in the rack.

If you install the FortiGate-5020 chassis in a closed or multi-unit rack assembly, 
the operating ambient temperature of the rack environment may be greater than 
room ambient temperature. Make sure the operating ambient temperature does 
not exceed the manufacturer's maximum rated ambient temperature.

For rack installation, make sure that the amount of air flow required for safe 
operation of the FortiGate-5020 chassis is not compromised.

The AC power connectors on the back of the FortiGate-5020 chassis provide 
power to two factory installed redundant FortiGate-5020/5050 power supplies. 
Each power supply distributes 800 W of 48VDC power to the entire 
FortiGate-5020 chassis. 

5.25 x 17 x 15.5 in. (13.3 x 43.2 x 39.4 cm)
(H x W x D)

35.5 lb. (16.1 kg)

Temperature: -13 to 158 °F (-25 to 70°C)

Relative humidity: 5 to 95% (Non-condensing)

Temperature: -20 to 80°C

Relative humidity: 5 to 95% (Non-condensing)

Maximum: 800 watts

2x redundant 110 to 250 VAC

Note: Mount the FortiGate chassis before installing the FortiGate-5000 series modules.

Caution: The FortiGate-5020 chassis should not be operated as a free-standing appliance.