Fortinet fortigate-300 Installationsanweisungen

Seite von 56
NAT/Route mode installation 
Next steps
FortiGate-300 Installation Guide
01-28004-0021-20040830
 35
If you are using the FortiGate unit as the DHCP server for your internal network, 
configure the computers on your internal network for DHCP.
Make sure that the connected FortiGate unit is functioning properly by connecting to 
the Internet from a computer on the internal network. You should be able to connect to 
any Internet address.
Next steps
You can use the following information to configure FortiGate system time, to register 
the FortiGate unit, and to configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide for complete information on configuring, 
monitoring, and maintaining the FortiGate unit.
To set the date and time
For effective scheduling and logging, the FortiGate system date and time must be 
accurate. You can either manually set the system date and time or configure the 
FortiGate unit to automatically keep its time correct by synchronizing with a Network 
Time Protocol (NTP) server.
1
Go to System > Config > Time.
2
Select Refresh to display the current FortiGate system date and time.
3
Select a Time Zone from the list.
4
Optionally, select Automatically adjust clock for daylight saving changes check box.
5
Select Set Time and set the FortiGate system date and time.
6
Set the hour, minute, second, month, day, and year as required.
7
Select Apply.
To use NTP to set the FortiGate date and time
1
Go to System > Config > Time.
2
Select Synchronize with NTP Server to configure the FortiGate unit to use NTP to 
automatically set the system time and date.
3
Enter the IP address or domain name of the NTP server that the FortiGate unit can 
use to set its time and date.
4
Specify how often the FortiGate unit should synchronize its time with the NTP server. 
5
Select Apply.
To register the FortiGate unit
After purchasing and installing a new FortiGate unit, you can register the unit by going 
to the System Update Support page, or using a web browser to connect to 
http://support.fortinet.com and selecting Product Registration.
To register, enter your contact information and the serial numbers of the FortiGate 
units that you or your organization have purchased. You can register multiple 
FortiGate units in a single session without re-entering your contact information.