Hussmann fg Installationsanweisungen

WWW

.

HUSSMANN

.

COM

Improper handling may cause damage to the 
merchandiser when unloading. To avoid damage:

1. Verify that adjustable feet are fully inserted
and securely positioned into the legs. 

2. Do not drag the merchandiser out of the 
trailer. Use a Johnson bar (mule).

3. Use one dolly to remove the merchandiser
from the trailer.

4. Use two dollies to move cases to lineup.

Direct a flashlight through the return air grille to
locate the serial plate. B

E SURE TO POSITION WIDE

ISLAND MERCHANDISER FRONTS PROPERLY

. The

front of wide island merchandisers is readily
identified by the location of the serial plate
affixed to the inside of the left front assembly.
Since all electrical and refrigeration connections
will be made at the front side, the fronts will need
to be positioned according to the store plan lay-
out. 

A secondary serial number sticker is put on the
exterior nosing on the discharge side. It gives the
model, serial number and manufacture date. 

Do NOT walk on top of merchandisers or 
damage to the merchandisers and serious 
personal injury could occur. T

such as the weight of a 

person. Do not place heavy objects on the case.

Be careful not to damage the factory installed end
while moving the case. Make sure that tools are
positioned past the end and beneath the support
bar.  

Move the merchandiser as close as possible to its
permanent location and then remove all packag-
ing. Check for damage before discarding packag-
ing. Remove all separately packed accessories
such as kits and shelves. Remove end braces and
discard hardware. 

Exercise caution at all times when moving mer-
chandisers with up tilt riders. They are top heavy
and should never be left in the vertical position.