Planar C3 Anleitung Für Quick Setup
Turn your computer off. Leave the power cord
plugged into the grounded outlet.
plugged into the grounded outlet.
To install the controller
1
Turn off all peripherals. Disconnect all cables from
the back of your computer.
the back of your computer.
2
Remove the computer cover.
3
Remove the blank bracket from the
available PCI slot.
available PCI slot.
4
Insert the display controller into the PCI slot,
align the connector pins, and press the
board down until it is firmly seated.
align the connector pins, and press the
board down until it is firmly seated.
5
Secure the mounting bracket.
6
Reattach the computer cover and the peripherals.
When installing multiple display controllers,
install all boards before you install the driver.
install all boards before you install the driver.
Display controller
installed
5
Installing the Display Controller
3
Remove blank
bracket
Open 64-bit
PCI slot
cx-QSUG-7 2/17/05 10:06 AM Page 5