Planar PL1900 Produkthandbuch

 

 

13

•  Power Button:  

Press this button to switch ON/OFF of monitor’s power. 

 

•  MENU / ENTER :  

Active OSD menu or function adjust confirm or Exit OSD menu 

when in Brightness/Contrast OSD status. 

 

•  Contrast :  

Adjust contrast or function adjust. 

•  Brightness : 

Adjust brightness or function adjust. 

•  Auto Adjust button / Exit: 

1.  When OSD menu is in active status, this button will act as 

EXIT-KEY (EXIT OSD menu). 

2.  When OSD menu is in off status, press this button over 2 

seconds to activate the Auto Adjustment function. 

The Auto Adjustment function is used to set the HPos, VPos, 

Clock and Focus.  

•   Power Indicator: 

Green  — 

Power On mode. 

Amber —  Standby 

mode. 

 

OSD Lock Function:  

Option 1:  

OSD lock - all 4 buttons are locked except the "POWER" 

            button.  Press and hold the "MENU" and "V" buttons for 3 

seconds to lock the buttons.  Repeat this step to unlock.

 

OSD & Power button lock - all 5 buttons including the  

"POWER" button are locked.  Press and hold the 

"MENU" and  "∧" buttons for 3 seconds to lock all 5 

buttons.  Repeat this step to unlock. 

 

•

 

Do not install the monitor in a location near heat sources such as 

radiators or air ducts, or in a place subject to direct sunlight, or 

excessive dust or mechanical vibration or shock. 

•  Save the original shipping carton and packing materials, as they 

will come in handy if you ever have to ship your monitor. 

•  For maximum protection, repackage your monitor as it was 

originally packed at the factory. 

•

 

To keep the monitor looking new, periodically clean it with a soft 

cloth. Stubborn stains may be removed with a cloth lightly 

dampened with a mild detergent solution. Never use strong 

solvents such as thinner, benzene, or abrasive cleaners, since 

these will damage the cabinet. As a safety precaution, always 

unplug the monitor before cleaning it.