KitchenAid kdrs407vss Benutzerhandbuch

Seite von 64
23
Convection Roast
Convection roasting is used for roasting meats and poultry. 
During convection roasting, the CleanBake™ and broil elements 
will cycle on and off in intervals to maintain oven temperature, 
while the fan constantly circulates the hot air.
If the oven door is opened during convection roasting, the fan 
turns off immediately when the door is opened and turns on 
immediately when the door is closed. Broil and bake elements 
will turn off approximately 30 seconds after the door is opened. 
They will turn on again approximately 30 seconds after the door 
is closed.
It is not necessary to reduce oven temperature when roasting 
with convection. Roasting time may be shorter for poultry.
For best results, use a broiler pan, grid and roasting rack, 
designed to drain juices and help avoid spatter and smoke.
If you would like to purchase a Broiler Pan Kit, it may be 
ordered. See “Assistance or Service” section to order. Ask for 
Part Number W10123240.
To Convection Roast:
Before convection roasting, position racks according to the 
“Positioning Racks and Bakeware” section. It is not necessary to 
wait for the oven to preheat before putting food in, unless 
recommended in the recipe.
Use a roasting rack on top of the broiler pan and grid. This holds 
the food above the grid and allows air to circulate completely 
around all surfaces.
1. Press CONVECT ROAST.
Press the number pads to enter a temperature other than 
325°F (162°C). The convection roast range can be set 
between 170°F and 500°F (77°C and 260°C).
2. Press START.
“Preheating” will show in the display until the set temperature 
is reached. 
“Lo” will also appear in the display if the actual oven 
temperature is under 170°F (77°C). 
When the actual oven temperature reaches 170°F (77°C), the 
oven display will show the oven temperature increasing in
1-degree increments. 
When the set temperature is reached, if on, 1 tone will sound.
3. Press OFF when finished cooking.
Convection Broil
During convection broiling, the broil elements will cycle on and off 
in intervals to maintain oven temperature, while the fan constantly 
circulates the hot air.
The temperature is preset at 450°F (232°C), but can be changed 
to a different temperature. Cooking times will vary depending on 
the rack position and temperature and may need to be adjusted.
If the oven door is opened during convection broiling, the fan 
turns off immediately when door is opened and turns on again 
immediately when door is closed. Broil elements will turn off 
approximately 30 seconds after the door is opened. They will turn 
on again approximately 30 seconds after the door is closed.
To Convection Broil:
Before convection broiling, see “Full and Center Broiling” section 
for general broiling guidelines. Position rack.
Allow the oven to preheat for 5 minutes. Position food on the 
unheated grid on the broiler pan, then place it in the center of the 
oven rack with the longest side parallel to the door.
Close the door.
1. Press CONVECT BROIL.
2. To change the preset temperature, enter the desired 
temperature on the numerical keys. The convection broil 
temperature can be set between 300°F and 500°F (149°C and 
260°C).
3. Press START.
The set temperature will appear on the oven display until the 
oven is turned off.
4. Touch OFF, when finished cooking.
A. Broil heat
B. Convection fan
C. Bake heat
C
B
A
A. Broil heat
B. Convection fan
B
A