Aethra d2001 nx Benutzerhandbuch
ISDN TESTER AND ANALYZER D2001
NX
USER’S MANUAL
4
Scroll through the result pages.
Page 1 shows information about the called number and the status of layers 1and 2.
In a P-P connection, the configuration Master/Slave is automatically detected.
In a P-P connection, the configuration Master/Slave is automatically detected.
Page 2 shows an overview of the tele- and bearer services available. The last row
displayed on this page shows the availability on the access of a second protocol.
Only for bi-protocol network (E-DSS1/1TR6).
displayed on this page shows the availability on the access of a second protocol.
Only for bi-protocol network (E-DSS1/1TR6).
For calls to a remote number:
►
The LOCAL column shows the services available at the local access for the
selected channel.
selected channel.
►
The REM column shows the services available at the remote access for the
selected channel.
selected channel.
For autocalls:
►
The OUT column shows the services available at the local access for outgoing
calls.
calls.
►
The IN column shows the services available at the local access for incoming
calls.
calls.
Page 3 shows an overview of the supplementary services analyzed by the
instrument.
instrument.
The following table shows the displayed symbols with their meaning.
YES
Implemented, active or actionable service
NO*
Implemented, but not subscribed, service
NO
Service not present
??
Service availability cannot be determined
In order to the check availability of the DDI/MSN service, you need to perform an
autocall and insert, as called number, one of the secondary numbers expected by the
tested access.
autocall and insert, as called number, one of the secondary numbers expected by the
tested access.
28
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST