Dwin duovision Betriebsanweisung
10
7. COMPOSITE VIDEO INPUTS (V1, V2)
The V1 and V2 inputs are provided for NTSC (480i) or PAL (580i) video sources,
such as off-air tuners, satellite systems, cable boxes, VCR and DVD players.
The V1 and V2 inputs are provided for NTSC (480i) or PAL (580i) video sources,
such as off-air tuners, satellite systems, cable boxes, VCR and DVD players.
8. COMPONENT VIDEO INPUTS (Y1, Y2, Y3)
Two component video Y, Cr, Cb or Y, Pr, Pb inputs are provided for interlaced
video signals from regular DVD players (480i, 580i), progressive component video
signals from progressive DVD players (480p, 580p), and progressive or interlaced
HD signals (480p, 540p, 720p, 1080i) from HD sources. The DuoVision
Two component video Y, Cr, Cb or Y, Pr, Pb inputs are provided for interlaced
video signals from regular DVD players (480i, 580i), progressive component video
signals from progressive DVD players (480p, 580p), and progressive or interlaced
HD signals (480p, 540p, 720p, 1080i) from HD sources. The DuoVision
™
Processor
automatically detects the resolution and configuration of the component video
signal applied to its input and processes it accordingly.
signal applied to its input and processes it accordingly.
9. AC POWER RECEPTACLE
The AC power receptacle should be connected to a non-switched 120 VAC outlet
using the power cord provided with the DuoVision
The AC power receptacle should be connected to a non-switched 120 VAC outlet
using the power cord provided with the DuoVision
™
system.
DWIN strongly recommends that the DuoVision
™
Projector and Processor both
be connected to the same AC line circuit.