Vivitar 6300 Betriebsanweisung

NTSC

PAL

Reset Number

Sets whether or not to reset the file number when you take photographs. This
creates a new folder. The captured images are recorded to the newly created
folder from number 0001. If you want to reset the file number, be sure that no
images are recorded in the internal memory or the SD memory card.
* Yes / No

Set to Default

Returns all basic settings to the ViviCam 6300’s default settings. The time setting
will not be reset.
* Yes / No

Version

This displays the current firmware version of the ViviCam 6300.

„

USB Mode

Selects to choose one of the following modes for further settings.
* PC / PictBridge / PC CAM.

TV

Sets video output of the ViviCam 6300 for matching the video output system of
the equipment that you are going to connect to the ViviCam 6300.
* PAL / NTSC

LCD Brightness

This sets the brightness of the LCD monitor.
The adjustment range is from -5 to +5.

Auto Shut Down If no operation is performed for a specific period of time, the power to the ViviCam 6300

is automatically turned off. This feature is useful to reduce battery wear.
* 2 Min. / 3 Min. / 5 Min. / Off

„

D

1