Sony DSC-P8 Betriebsanweisung
25
S
hoo
ting st
ill
im
ages
Selecting a flash mode
,
Set the mode dial to
, and
press
v
( ) on the control
button repeatedly to select a
flash mode.
flash mode.
Each time you press v ( ), the indicator
changes as follows.
changes as follows.
No indicator (Auto):
The flash
automatically strobes when shooting
images in a dark place or against a light
source.
images in a dark place or against a light
source.
(Forced flash):
The flash strobes
regardless of the surrounding brightness.
(Slow synchro):
The flash strobes
regardless of the surrounding brightness.
The shutter speed is slow in a dark place, so
you can clearly shoot the background that is
out of flash light.
The shutter speed is slow in a dark place, so
you can clearly shoot the background that is
out of flash light.
(No flash):
The flash does not strobe.
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
first so that the menu disappears.
•
You can also carry out this operation when the
mode dial is set to
mode dial is set to
or
(Clip Motion).
•
When [ISO] is set to [Auto] in the menu
settings, the recommended shooting distance
using the flash is approximately 0.5 m to 3.5 m
(19 3/4 inches to 11 feet 5 3/16 inches) (W)/
0.5 m to 2.5 m (19 3/4 inches to 8 feet 2 7/16
inches) (T).
settings, the recommended shooting distance
using the flash is approximately 0.5 m to 3.5 m
(19 3/4 inches to 11 feet 5 3/16 inches) (W)/
0.5 m to 2.5 m (19 3/4 inches to 8 feet 2 7/16
inches) (T).
•
You can change the brightness of the flash with
[Flash Level] in the menu settings (page 48).
(You cannot change the brightness of the flash
while the mode dial is set to
[Flash Level] in the menu settings (page 48).
(You cannot change the brightness of the flash
while the mode dial is set to
.)
•
When using the
(Slow synchro) or
(No
flash) mode, the shutter speed becomes slower
in dark places, so using a tripod is
recommended.
in dark places, so using a tripod is
recommended.
•
While charging the flash, the /CHG lamp
flashes. After the charging is complete, the
lamp goes out.
flashes. After the charging is complete, the
lamp goes out.
•
This setting is maintained even when the power
is turned off.
is turned off.
Shooting images against a
light source
light source
In auto adjustment mode, shooting against a
light source automatically strobes even
when there is enough light around the
subject (Daylight synchro).
light source automatically strobes even
when there is enough light around the
subject (Daylight synchro).
Before strobed
When strobed
•
Daylight synchro may not procedure the
desired effects depending on shooting
conditions.
desired effects depending on shooting
conditions.
•
When you do not want to use the flash, set the
flash mode to
flash mode to
(No flash).
VGA
101
96
S AF
60
min
SL
SL