Lorex ipsc2230 Installationsanweisungen
(2) Select a screen display that provides device and/or network status. In the
case of the DLink-624 it will appear as follows:
Figure 3: WAN Status
The status and external IP Address of the router are clearly shown in the WAN section.
Step 2: Set up the Static IP address
Some routers, including the DLink-624, have the capability to fix the internal IP
addresses that are distributed using DHCP.
addresses that are distributed using DHCP.
If your router supports this feature, you will want to set it up to ensure that the internal IP
address never changes.
address never changes.
In the case of the Dlink-624, click the 'DHCP' button and then click on the DHCP Server
'Enabled' radio button. From the DHCP client dropdown list select the entry that
corresponds to the Lorex Module and click on the 'clone' button. Click on the Static
DHCP 'Enabled' radio button. Then click on the 'Apply' button to save this configuration.
'Enabled' radio button. From the DHCP client dropdown list select the entry that
corresponds to the Lorex Module and click on the 'clone' button. Click on the Static
DHCP 'Enabled' radio button. Then click on the 'Apply' button to save this configuration.
© 2005 Strategic Vista International Inc.
- 5 -
IPSC2230_2260_MANUAL-EN.R1.doc