Lorex lw2101 Anleitung Für Quick Setup

www.lorexcctv.com

For detailed setup information, 

please refer to your User’s Manual. 

For additional information and 

accessory purchases, please visit 

our website 

1. Wireless antenna: connects to the back of
    the receiver.
2. channel Leds: When lit up, indicates
    the active viewing mode.
3. resolution* button: Press to switch
    between Vga and qVga video resolutions;
    press and hold for several seconds to
    remove/replace channels from auto-scan.
4. Front Led: Lit in green to indicate power to
    the receiver.
5. channel: Press to change channels (1~4),
    enter quad split-screen mode, and 
    auto-scan viewing mode; press and hold 
    to add (pair) a new camera to the receiver.

©2009 Lorex Technology Inc.

as our product is subject to continuous improvement, Lorex Technology & 

subsidiaries reserve the right to modify product design, specifications, prices & 

warranty without notice and without incurring any obligation. e&Oe

*NOTe: You can install additional cameras (maximum of 4 cameras). 

When adding cameras that were not included in the original box, you 

will need to pair up the cameras with the receiver. refer to the camera 

pairing section of the included user manual for more details.

*Vga mode has a resolution of 640 x 480 
pixels; qVga mode has a resolution of 320 
x 240 pixels. Use Vga mode for the best 
video performance. Use qVga mode if you 
need a higher video frame rate.

even with a clear line-of-sight between your camera(s) and 

your receiver, you may experience a lower frame rate simply 

due to the distance between your wireless devices. accessory 

antennas are available that can help extend the range of your 

wireless signal. Visit www.lorexcctv.com for more details.

LW2100 - qUIck sTarT gUIde