Bizfon 2000 Betriebsanweisung
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
8
The System Configuration page contains the host name,
IP address and Subnet Mask information about the Bizfon
LAN interface. These settings make Bizfon available to the
internal network.
IP address and Subnet Mask information about the Bizfon
LAN interface. These settings make Bizfon available to the
internal network.
The System Configuration page offers the following input
options:
options:
Host Name requires a host name for the Bizfon device.
Domain Name requires the LAN side domain name which
the Bizfon belongs to.
the Bizfon belongs to.
IP Address requires the Bizfon host address for the LAN
interface.
interface.
Subnet Mask requires the Bizfon hosts’ Subnet Mask.
Fig. II-4: System Configuration Wizard - System Configuration page
The Regional Settings and Preferences are used to
select settings specific to the location of the Bizfon. This is
important for the functionality of the voice subsystem.
select settings specific to the location of the Bizfon. This is
important for the functionality of the voice subsystem.
The Regional Settings and Preferences page has two
drop down lists to select the Location (country) and a
corresponding Timezone. Bizfon will support Daylight
Savings (DST) correction if it is available for the selected
time zone.
drop down lists to select the Location (country) and a
corresponding Timezone. Bizfon will support Daylight
Savings (DST) correction if it is available for the selected
time zone.
This page also has a manipulation radio button group to
choose:
choose:
•
System Language – selection is available only when
the custom Language Pack has been uploaded and it
is used to enable custom language for system voice
messages or returning back to the default language
English.
is used to enable custom language for system voice
messages or returning back to the default language
English.
•
GUI Theme - selection used to select the GUI theme
style of the web based configuration pages.
Fig. II-5: System Configuration Wizard - Regional Settings page
The Emergency Codes and PSTN Access Codes
Settings are used to configure the emergency dial plan.
Settings are used to configure the emergency dial plan.
The Emergency Codes text field requires the PSTN
numbers of the emergency or lifeline services. Multiple
emergency codes, separated by commas, can be inserted
in this field. For each emergency code, a routing pattern will
be generated in the Call Routing Table, which will allow
faster and easier calls to emergency destinations.
numbers of the emergency or lifeline services. Multiple
emergency codes, separated by commas, can be inserted
in this field. For each emergency code, a routing pattern will
be generated in the Call Routing Table, which will allow
faster and easier calls to emergency destinations.
The PSTN Access Code drop down list allows you to
select the prefix code for accessing the PSTN line in the
routing mode. Dialing the digits inserted in this text field will
provide the PSTN dial tone when dialed from the handset.
select the prefix code for accessing the PSTN line in the
routing mode. Dialing the digits inserted in this text field will
provide the PSTN dial tone when dialed from the handset.
Fig. II-6: System Configuration Wizard - Emergency Codes and PSTN Codes Settings page