Hitachi DZ-MV780A Benutzeranleitung

Seite von 190
English
154
Changing Setting of Demonstration
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. three 
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting 
to “Off”.
1
Press the MENU button.
2
Choose “Initial Setup”, 
“Demo Mode”, and 
then press the A 
button.
3
Press the f or e 
button to choose the 
desired option, and then press the A 
button.
Press the MENU button again: The menu 
screen will disappear.
To stop the demonstration midway, press the 
C button.
The demo mode will end when the DVD 
video camera/recorder is turned off or the 
DISC EJECT button is pressed down.
Note
:
• You can press the DISC NAVIGATION button to stop 
demonstration midway: The Disc Navigation screen 
will appear.
• If you choose “Auto”, the demonstration will not start if 
a disc is loaded with the power switch set to “
O
” or 
N
”, or a card is loaded with the power switch set to 
P
”.
• The demonstration function will not work when the 
DVD video camera/recorder is connected to PC (for 
DZ-GX20A or DZ-MV780A only).
• While the demonstration is being given, the recording 
indicator will blink.
Auto: To start demonstration approx. 3 
minutes after turning the DVD video 
camera/recorder on.
Off:
To set demonstration to off.
Start:
To start demonstration immediately.
RAM
O f f
S t a r t
ENTER
RETURN
Demo Mode
R e s e t
Re c o r d   LED
Powe r   S ave
B e e p
L a n g u a g e
A u t o
I n i t i a l   S e t u p