Hitachi cmp4221u Benutzeranleitung
34
ENGLISH
TROUBLESHOOTING (continued)
Actions to Correct Abnormal Displays (RGB Input)
Corrections d'affichage anormales RVB 1 seulement
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only
for RGB)
for RGB)
Symptom 1
Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1).
The display image appears flowing (Figure 2) (RGB input).
The display image appears flowing (Figure 2) (RGB input).
Example Figure
1
Vertical Streaks
Before adjustment.
Some characters are blurred.
Some characters are blurred.
After adjustment.
All characters appear
crisp now.
All characters appear
crisp now.
After adjustment.
All characters are
blurred.
All characters are
blurred.
1) Press the MENU button. The Main Menu will be displayed.
2) Press the OK key and
2) Press the OK key and
W Xbutton then Select Image.
3) Press the
S T SELECT button and select Auto Adjustment.
4) Press the
X button to auto configuration.
Adjustment
procedure
procedure
When adjustment is not possible with Auto Adjust:
5) Press the MENU button. The Main Menu will be displayed.
6) Press the OK key and
5) Press the MENU button. The Main Menu will be displayed.
6) Press the OK key and
W Xbutton and select Image.
7) Press the
S TSELECT button and select Frequency Mode.
8) Press the
X or W buttons and search for clear characters over the entire screen.
9) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
z
The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Symptom 2
Text displayed across the screen appears blurred in its entirety (Figure 2).
A fine pattern flickers when displayed on the screen (Figure 3).
A fine pattern flickers when displayed on the screen (Figure 3).
Example Figure
2
Before adjustment
After adjustment
Figure 3
Before adjustment
After adjustment
1) Press the MENU button. The Main Menu will be displayed.
2) Press the
2) Press the
W Xbutton and Select Image.
3) Press the
S TSELECT button and select Auto Adjustment.
4) Press the
X button to auto configuration.
When adjustment is not possible with Auto Adjust
5) Press the MENU button. The Main Menu will be displayed.
6) Press the OK key and
5) Press the MENU button. The Main Menu will be displayed.
6) Press the OK key and
W X button and select Image.
7) Press the
S TSELECT button and select Clock PHASE.
(Displays fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
Adjustment
procedure
procedure
8) Press
X or W buttons to make the text appear clean across the
screen.
9) Press
Xor W buttons to make the text appear without flickering.