Hitachi p42h401 Benutzeranleitung

Rear Panel Connections

햲 Antenna Input

To switch between Cable and Air input, go to the
Channel Manager option to change the signal
source CABLE or AIR.

햳 Audio/Video Inputs 1, 2 and 3

By using the INPUTS button, the CURSOR PAD (

and

), and the SELECT button or CURSOR PAD

of the remote control, you can select each video

source. Use the audio and video inputs to connect
external devices, such as VCRs, camcorders,
laserdisc players, DVD players etc. (if you have
mono sound, insert the audio cable into the left
audio jack).

햴 MONITOR OUT & AUDIO OUT

These jacks provide fixed audio and video
signals (CABLE/AIR or INPUTS ) which are
used for recording. Use the S-VIDEO output
for high quality video output. Component signal
to Input 2 and 3, and HDMI inputs will not
have monitor output.

햵 Optical Out (Digital Audio)

This jack provides Digital Audio Output for your
audio device that is Dolby

Digital and PCM

compatible, such as an audio amplifier.

NOTE: *Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.

햶 S-VIDEO Input 1

Input 1 provide S-VIDEO (Super Video)
jacks for connecting equipment with S-VIDEO
output capability.

NOTE: 1. You may use VIDEO or S-VIDEO inputs to

connect to INPUT 1 , but only one of
these inputs may be used at a time.

2. S-VIDEO output may be used for

recording, only when the input is of
S-VIDEO type.

햷 HDMI 1, 2 (High Definition Multimedia

Interface)
ABOUT HDMI – HDMI

is the

next-generation all digital interface for consumer
electronics.

HDMI

enables the secure distribution

of uncompressed high-definition video and multi-
channel audio in a single cable. Because digital
television (DTV) signals remain in digital format,

HDMI

assures that pristine high-definition images

retain the highest video quality from the source all
the way to your television screen.

Use the

HDMI

input for your external devices such

as Set-Top-Boxes or DVD players equipped with an

HDMI

output connection.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

NOTE: 1. The HDMI input is not intended for use

with personal computers.

2. Only DTV formats such as 1080p, 1080i, 720p,

480i and 480p are available for HDMI input.

햸 Component: Y-PBPR Inputs

INPUTS

and

provide Y-PBPR jacks for

connecting equipment with this capability, such as
a DVD player or Set Top Box. You may use
composite video signal for both inputs.

NOTE: 1. Do not connect composite VIDEO and

S-VIDEO to INPUT 1 at the same time.
S-VIDEO has priority over VIDEO input.

2. Your component outputs may be labeled

Y, B-Y, and R-Y. In this case, connect the
components B-Y output to the TV’s P

input and the components R-Y output to
the TV’s P

input.

3. Your component outputs may be labeled

Y-CBCR. In this case, connect the component
CB output to the TV’s P

input and the

component C

R output to the TV’s P

input.

4. It may be necessary to adjust TINT to

obtain optimum picture quality when using
the Y-P

inputs (see page 34).

5. To ensure no copyright infringement, the

MONITOR OUT output will be abnormal,
when using the Y-P

jacks and HDMI

Input.

6. INPUT 2 , and 3 (Y/VIDEO) can be used for

composite video and component video
input.

햹 For Special AV control use only.

햺 For Factory use only.

햲

햳

햸

햹

햴

햷

햺

햵

햶