Hitachi vt-fx610a Benutzeranleitung

 

When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4.  You need to 
select the appropriate channel. 

 

 If you already have a tape in the VCR, eject it. When the power is turned on, press POWER to turn it off. 

Press PLAY/STILL on the VCR to turn the power on again. Pressing the CHANNEL UP button on the VCR 
alternates between RFCH-03 (channel 3) and RFCH-04 (channel 4) in the VCR's display. Display the channel 
which is not used by a commercial channel in your area. 

Your basic hookup is now complete.  When you're ready to try hooking up a second VCR or a video camera for 
a complete home entertainment system, see Advanced Operations. 

Now turn the TV and VCR back around facing you and begin your quick tour of the controls (page 15). 

Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation.  
Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar 
with their locations. 

Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR 
that will come in handy too. 

When you're familiar with these basic controls, proceed to Setup for First-Time Operation (page 21).  We'll show 
you how to program your local channels and set the clock to make your VCR fully functional.