Hitachi vt-fx610a Benutzeranleitung

 Erased channels cannot be selected by the up and down CHANNEL buttons but can still be selected by using 

the numbered buttons 0 to 9 and 100/ENT. 

Adding Channels 
Occasionally the auto-programming may skip an active channel because the antenna was pointed in the wrong 
direction or the channel had a weak signal or was "off the air" at the time of programming.  Or you may change 
your mind about a channel you removed from memory. 

 Press GUIDE, then press 4 to bring up the CHANNEL PRESET screen. Item 3 lets you add or delete 

channels.  Use the number buttons to enter the channel you want to change, then press STOP to delete it or 
press PLAY to add it. 

Press GUIDE, then press 2 to bring up the VCR SETUP screen. 

 

The screen shows the default settings on your VCR. The default settings are the ones that are preset at the 
factory. 
Look at each item to see if it matches your own setup: 

 To change a setting, press the button that has the same number as that item. This will cycle you through 

several options. 

 When everything is set up as you want, press GUIDE to return to regular viewing. 

Here is what the options mean: 

1 AUTO BLUE  Press 1 to control the auto blue function which makes the screen blue and mutes sound when 
you select a channel without a broadcast signal on the VCR or a channel without a broadcast signal on the VCR 
or a channel on which broadcasting has finished. Options are <ON> and <OFF>. 

 If the signal is too strong, this function may not operate even if you specifiy <ON>. During playback this 

function does not operate. 

4 HIFI/LINEAR  Press 4 to control how the audio signal is processed by the VCR. Options are <HIFI> and 
<LINEAR>. 

5 STEREO/MONO 

Press 5 to control how the audio signal is recorded and sent to the TV. Options are 

<STEREO> and <MONO>. 

6 SAP   

 

Press 6 when you are ready to record a second audio program. Options are <OFF> and 

<ON>. 

Choose between hi-fi and linear modes, depending on your needs. 
HIFI is the preferred setting because it works for all tapes whether they were recorded in hi-fi or linear modes.  If 
the audio sounds distorted or unusual or there is no audio, try the LINEAR option. 
When you set the option to HIFI, hi-fi tapes will play in high fidelity, and  non-hi-fi tapes will play in linear mode. 

When you select the STEREO option, your VCR records in stereo any station that broadcasts stereo sound.