Hitachi vt-fx610a Benutzeranleitung

 

Now fill in the blanks: 

 Select channel 8 by pressing 0 and 8 on the remote control. 
 Enter the start time by pressing 0, 6, 0, and 0 for 6 o'clock. Then press 2 for PM 
 Enter the end time, half past six, as 06:30. The VCR automatically selects PM for you. 
 The screen shows today's date, so no changes are needed on that line. 
 Press 5 to switch to SP because you want the best quality picture for this recording. 

Everything is as you want it, so press PROGRAM to set the program in memory.  
Insert a videocassette, and power off the VCR. Check for the delayed recording indicator on the VCR's display. 
Prepare to admire yourself on the evening news. 

You can look back over any of the recordings you have preset, and if you need to, clear out any of the 
programs. Normal programs will clear automatically once recording is complete, but daily and weekly settings 
must be cleared out manually. 

 Press GUIDE, then press 1 for the PROGRAM REVIEW option. This brings up the screen settings for the first 

program. Keep pressing 1 to cycle through all the programs you have preset. 

 To remove a program, press CLEAR. The screen will display the next program, if there are more, or it will 

switch back to regular TV viewing. 

When you have set up several timed recordings, it may occur that some of their times overlap. For example, this 
can happen if you are set up to record shows on a daily or weekly basis, and a special show comes on that you 
try to record during the same time slot. 

Shows with Same Starting Time 
If the overlapping programs start at the same time, the VCR records in order that they were programmed. If the 
shows are all scheduled to start at 7 AM, the VCR starts with the first program at 7 AM, and switches to what 
remains of the second program when the first program is done recording, and so on. 

Shows with Different Starting Times 
If the programs start at different times, the VCR records the show scheduled to start earliest, records the entire 
show, then moves on to the show with the next earliest starting time. 
To avoid recording only bits and pieces of different overlapping shows, review your programming and delete 
those shows that are not essential.