Delfield mfpt2r-g Техническое Руководство

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date____________________

Exterior: Cabinet front and shroud shall be 22-gauge 

stainless steel. Exterior sides shall be aluminum.   Facing 
of shroud shall be easily removable without the use of 
tools.
Cabinet interior shall be anodized aluminum. Bottom 
& top of liner shall be die-stamped to provide 
radius corners and a recessed bottom. Base shall be 
fully insulated with high-density foamed in place 
polyurethane.
Interior shall have three epoxy-coated wire shelves per 
door section. Shelf support pilasters shall be heavy-duty  
with shelves adjustable at 1.0” (2.5 cm) increments. 
Units are mounted on 6” (15.24 cm) metal legs.

Doors: Unit is provided with hinged glass front door(s).  

Doors on freezer units are constructed with double-pane 
low-E, Argon filled tempered themopane glass.  Glass 
doors are constructed with a combination of extruded 
aluminum & PVC, and are provided with magnetic 

gaskets.  Doors will have

 

self-closing hinges and continuous 

handle along vertical dimension of door(s).  Glass door 
constructed to eliminate need for heater wires.  

• Please specify right or left hand hinging at time of order
Mechanical controls shall be located behind a removable 
shroud facing. 

Freezers: Refrigeration system shall use R404A 

refrigerant.  System shall be completely outside food zone 
to maximize internal storage space.  System shall utilize a 
dual diversion high flow air distribution system, and shall be  
a high capacity design.  Evaporator coils shall have deep-
corrugated, staged fin construction for maximum efficiency 
with fewer defrost cycles. Cabinet shall maintain 0

0

F internal 

temperature.

Single Voltage Models Only: Electrical connections 

shall be 115 volt, 60 hertz, single phase, with an 
eight ft. (2.4m) long electrical cord & plug as shown 
on reference chart. Cord & plug shall be wired to the 
junction box on top of the unit.

Dual Voltage Models Only: Electrical connections 

shall be 115/208-230 volt, 60 hertz, single phase, and 
must be hard-wired to the junction box located on top 
of the unit.

 

MFPT2R-G 

Single section

 

Full height doors

 

Remote only

 

MFPT2R-GH 

Single section

 

Full height doors

 

Remote only

•  Shroud removes without tools, for easy condenser 

maintenance

•  Built in door locks
•  Durable stainless steel doors and shroud, for lasting good 

looks

•  New high-density foam insulation cuts energy costs
•  Big, easy grip handles are easy to find, don’t intrude into 

kitchen traffic

•  Attractive aluminum side panels are easy to clean and 

corrosion resistant

•  Heavy-duty hinges with stay open feature
•  Refrigeration system is located outside the food zone, more 

space for product storage

•  Mini watt door heaters eliminate condensation with 

minimal energy cost

•  Easy to read dial thermometer
•  Tri seal door gaskets lower energy costs with a unique 

insulating design

•  Epoxy coated shelves—corrosion resistant, 300-lb. 

capacity.  Flexible placement on 1” centers allows 
maximum storage

•  Aluminum interior stands up to food acids without 

corroding

•  Lots of interior storage space for the money
•  Rugged metal legs, adjustable to compensate for 

uneven floors

OPTIONS AND ACCESSORIES
 

Stainless steel exterior sides

 

Stainless steel interior

 

Stainless steel kick plate

 

Door and end laminate

 

Stainless steel exterior back

 

Digital thermometer

 

TXV

 

Chrome Shelves

 

Tray Slides

 

220/50/1 electrical

 

Electronic control

 

Stainless steel legs

 

Casters