Delfield sprh-68e Техническое Руководство

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date ____________________

❑ 

68” length, refrigerator/heated module, 30” height, 30” depth

•  14-gauge stainless steel top standard
•  30” counter height, 30” depth
•  9’ long cord and plug are supplied standard
•  Two separate systems, one heated, one refrigerated
•  18-gauge stainless steel exterior standard
•  Electrical: 120 volt, 60 cycle, single phase
•  R134A refrigerant
•  Removable sliding lids (two per unit) standard
•   Standard on 5” diameter polyurethane swivel casters
•  Stainless steel fully retractable interlock provided as 

standard

•   Basket rack system is standard
•  A wide selection of laminate colors available at no 

additional charge

•  Heated portion has stay cool surface, top is designed 

to stay below 90˚

•   Laminate selection has 18-gauge galvanized base, 

16-gauge coved corner supports to protect laminate

•   Meets NSF2, NSF7, UL and CEC standards
•  One-year parts and 90 day labor standard warranty.  

Additional warranties available

•  Holds baskets size, 13.25” x 20.5” x 2.5” or 
 

13.25” x 20.5” 4.75”

OPTIONS AND ACCESSORIES
❑ 

Single tier merchandiser (Unheated)

❑ 

Double tier merchandiser (Unheated)

❑ 

16”x30” Stainless steel drop tray shelf

❑ 

Stainless steel cash self

❑

  Tray slides

 

• V-style

 

• Tubular bar

❑

  2” Wire basket (13.25”x20.5”x2.5”)

❑

  4” Wire basket (13.25”x20.5”x4.75”)

❑

  Decal package

❑

  Canopy

Exterior: Exterior body is constructed of 18-gauge stainless 

steel side panels or 18-gauge galvanized reinforced laminate 
panels. 14-gauge galvanized bottom.  All exterior side panels 
are reinforced with overlapping corners and are welded 
in place.  All insert cutouts are reinforced with 14-gauge 
galvanized channel supports.
Exterior top is constructed of 14-gauge stainless steel, welded, 
ground and polished into one integral unit.  Top is fabricated 
with square exterior corners with fully hemmed nosing on all 
sides.  Stainless steel fully retractable interlocks are installed 
on opposing corners and locks units into a complete serving 
system.

Interior, Refrigerated Section: Refrigerated cold pan is 

10” deep one-piece constructed stainless steel tank.  Louvered 
front and rear sides are for re-circulated forced air-cooling.  
The tank is separated from the top by a polycarbonate  
thermal break and is fully insulated with foamed in place 
high-density polyurethane foam.  A stainless steel access panel 
is located in bottom of tank, allowing complete access to the 
evaporator coil and fan package.
On/Off switch is located on the operator side in a recessed 
panel with a hinged cover plate.
Refrigerated tank maintains NSF7 temperature requirements.

Interior, Heated Section: Heated pan is 10” deep one-piece 

constructed stainless steel tank.  Louvered front and rear sides 
are for re-circulated forced air heating.  The tank is separated 
from the top by a polycarbonate thermal break keeping 
surface temperatures below 90 degrees.  Entire tank is fully 
insulated with foamed in place high-density polyurethane 
foam.

Lid: Lids are constructed of stainless steel and are foamed with 

polyurethane insulation.  The lid thickness is 3/4”.  Lid handle 
shall be black, recessed ABS.  Lids are removable without the 
use of tools.  Stainless steel lid locking bar is standard.  Bar 
has locking handle at one end and mounts to clips, which are 
bolted to the top of the cabinet.  The locking bar extends the 
length of the unit.  Entire assembly can be removed during the 
serving period.

Refrigeration:  Refrigeration system uses R134A refrigerant 

and has a self-contained 120 volt, 60 Hertz, single phase 
hermetically sealed condensing unit.  The system utilizes and 
evaporator coil and fan package for re-circulated forced air-
cooling of product.  Unit is supplied with an expansion valve 
and hot gas condensate evaporator.

Heating System:  Convected air type heating system with 

squirrel cage blower and on/off switch.  Components include 
high limit protection circuit, (2) 900-watt fin style heating 
elements and a night switch.
A stainless steel access panel is located in the bottom of the 
unit allowing complete access to the heating elements.  The 
fan is accessible through the operator side of the control panel.  
Units meet NSF 4 temperature requirements.
Night switch is located on the operator side in the upper right 
corner behind a spring-hinged cover.  On/off switch and 
adjustable range thermostat is located on the operator side in a 
recessed panel with a hinged cover plate.

Electrical: Electrical connections shall be 120 volt, 60 Hertz, 

single  phase.  Unit shall have a 9’ long electrical cord and 
NEMA 5-30 plug.  Cord is standard on the operator right side 
of equipment.  Double cord hook is located on the bottom of 
the unit.

Casters: Unit is mounted on 5” (12.7cm) diameter swivel 

polyurethane casters with non-marking tires and plate brakes.  
Casters are bolted directly to the 14-gauge bottom of the base.  
Overall height of caster assembly is 6.00” (15.2cm).

Styling: Units are standard with 18-gauge stainless steel 

exterior sides.  Laminate is an option available at no additional 
charge.  Decal packages and canopies are also available.