Alphasmart dana Betriebsanweisung

Changing SmartApplet Settings

. . . . .

Each SmartApplet has its own settings, which you set in AlphaSmart 
Manager. (Some of these settings are also available on the NEO itself in the 
Control Panel. Some settings are different in the two locations.)

The number of settings for each SmartApplet varies. AlphaWord Plus, for 
example, has several settings; other SmartApplets have only one. 

Follow the steps below to change the settings for SmartApplets on the 
connected NEO(s).

If you have a SmartOption Mobile Lab connected to your computer, you can 
only change settings for SmartApplets that are installed on all connected 
NEOs or that you have just chosen to install on the connected NEOs. Only 
these SmartApplets are listed in the Settings list. This can be especially 
important if you are using a mixed SmartOption Mobile Lab because 
SmartApplets that are for NEO 2 only (such as the Accelerated Reader and 
Responder SmartApplets) are not listed if NEO 1 laptops are connected as 
well as NEO 2 laptops. Disconnect the NEO 1 laptops if you want to change 
settings for NEO 2 SmartApplets.

1. In AlphaSmart Manager, click the Settings tab.
2. Click the SmartApplet in the Settings List on the left 

.

3. Check the settings you want to change 

; then, make your changes to 

the settings on the right. You may need to scroll to see some settings.

saved send list (see 
page 62), and you are using 
or installing a newer version of 
the SmartApplet the next time 
you open the send list, the 
setting changes won’t be 
used. Setting changes only 
apply to the version of the 
SmartApplet that you were 
using when you selected the 
settings.