Canon rebel t3 Betriebsanweisung
108
Due to the lens characteristics, the four corners of the picture might look
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected automatically. The default setting is
[Enable]. With JPEG images, the correction is done when the image is
captured. For RAW images, it can be corrected with Digital Photo
Professional (provided software, p.270).
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected automatically. The default setting is
[Enable]. With JPEG images, the correction is done when the image is
captured. For RAW images, it can be corrected with Digital Photo
Professional (provided software, p.270).
1
Select [Peripheral illumin.
correct.].
correct.].
Under the [1] tab, select
[Peripheral illumin. correct.], then
press <
[Peripheral illumin. correct.], then
press <
0>.
2
Select the setting.
On the screen, check that
[Correction data available] is
displayed for the attached lens.
[Correction data available] is
displayed for the attached lens.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on the next page.
displayed, see “About the Lens
Correction Data” on the next page.
Select [Enable], then press <
0>.
3
Take the picture.
The image will be recorded with the
corrected peripheral illumination.
corrected peripheral illumination.
3
Correcting the Image’s Dark Corners
Correction disabled
Correction enabled
CO
PY