Canon rebel t3 Betriebsanweisung

218

Custom Functions are organized into four groups based on the function 
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others.

3

 Custom Function SettingsN

Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc. Effective when 
you prefer to control the exposure in less fine increments than 1/3-stop 
increments.

When you use flash in the aperture-priority AE mode (f), you can set the 
flash sync speed.
0: Auto

The flash sync speed is set automatically within a range of 1/200 sec. to 
30 sec. to suit the scene’s brightness. With an external Speedlite, high-
speed sync will also be possible.

Prevents a slow shutter speed from being set in low-light conditions. It is 
effective for preventing subject blur and camera shake. However, while 
the subject will be properly exposed with the flash, the background may 
come out dark.

The flash-sync speed is fixed to 1/200 sec. This more effectively 
prevents subject blur and camera shake than with setting 1. However, 
the background may come out darker than with setting 1.

With setting 1, the exposure level will be displayed in the viewfinder and on 
the LCD monitor as shown below.

When 1 or 2 is set, high-speed sync cannot be used with an external 
Speedlite.

CO

PY