Canon rebel t3 Betriebsanweisung

Z

: Changing the ISO SpeedN

78

If the ISO speed is set to [AUTO], the 
actual ISO speed to be set will be 
displayed when you press the shutter 
button halfway. As indicated below, the 
ISO speed will be set automatically to 
suit the shooting mode.

*1: Fixed at ISO 800 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: If bounce flash is used with an external Speedlite in a Basic Zone (except 

<

6>) mode, <d> or <8> mode, ISO 800 - 1600 (or up to the maximum 

limit) will be set automatically.

*5: Fixed at ISO 400 if the maximum limit is ISO 400.

For ISO Auto, you can set the maximum ISO speed limit within ISO 400 - 6400.

Under the [y] tab, select [ISO Auto], 
then press <

0>. Select the ISO speed, 

then press <

0>.

1/7/C/3/4/5/6

Automatically set within ISO 100 - 3200

d

/s/f/a

*1

/

8

Automatically set within ISO 100 - 6400

*2

2

Fixed at ISO 100

With flash

Fixed at ISO 800

*3*4*5

3

 Setting the Maximum ISO Speed for ISO AutoN

 

When [AUTO] is set, the ISO speed is indicated in whole-stop 
increments. However, the ISO speed is actually set in finer increments. 
Therefore, in the image’s shooting information (p.198), you may find an 
ISO speed like 125 or 640 displayed as the ISO speed.

 

In the <

2> mode, the ISO speed shown in the table is actually used 

even if ISO 100 is not displayed.

CO

PY