Canon C545 Benutzerhandbuch

Remove these items from the documentation package: 

this Quick Start Guide, the MultiPASS C545 Installer CD

packet, MultiPASS C545 User's Manual, Registration card,

and Warranty card. 
Remove these hardware items from the top tray:

Remove all pieces of shipping tape from the outside of 

the printer. Be sure to remove the tape from the back of 

the printer also.
Remove the protective plastic piece from the sheet feeder.

MULTI-PURPOSE TRAY
(     FEEDER)

AUTOMATIC 
DOCUMENT 
FEEDER 
(ADF)

Remove the protective sheet covering the 

operation panel.

Note that tape may not be in the exact locations shown.

Use both hands to grip the operation panel, and

gently pull it toward you until it opens partially.

Remove the soft styrofoam sheet from the unit's

Automatic Document Feeder (ADF).

PROTECTIVE
PLASTIC

Lift out the MultiPASS unit from the bottom.

Ink

Cartridge

BCl-21

Made  in

Japan

Black

SENDING DOCUMENT 

SUPPORT

TELEPHONE

LINE

POWER

CORD

BC-21e COLOR 

BJ CARTRIDGE

EXTRA BCI-21

BLACK BJ TANK

SB-21 BJ CARTRIDGE

STORAGE BOX

Save the box and shipping materials. 

You may need them later if you have to transport 

the MultiPASS.

Press the operation panel closed until it clicks

into place.

Check for any tape or shipping material inside

the unit and remove it.

MULTI-PURPOSE TRAY

(SHEET FEEDER) –

holds paper for 

printing or receiving faxes

AUTOMATIC DOCUMENT FEEDER (ADF) –

holds documents to be

faxed, copied or scanned

PRINTER

COVER

Caution

The MultiPASS is equipped with a 3-prong, 

grounding-type plug. This plug will only fit 

into a grounding-type outlet. This is a safety 

feature. Do not defeat the safety purpose of 

this plug. Make sure the socket-outlet is 

located near the MultiPASS and is easily 

accessible.

CANON/MPC545 Q.S.G: Pages 2 & 3   -  File: 545QS2-3.eps
Wendi Swanlund                                         Correx> August 19 '99

PAGE 2 (BACKS COVER/1)

PAGE 3 (BACKS 6)

USB-TO-PARALLEL

 CABLE

Fit the tabs on the sending 

document support into the 

slots above the ADF.

Make sure the

support curves

toward the back

of the unit.

Make sure the computer is turned off.
Connect the USB—to—Parallel cable to the

MultiPASS and to your

computer.

Place the main unit of the MultiPASS on a level surface with plenty of room to work.

L

If you have only one telephone line and plan to use the 

MultiPASS for receiving both faxes and voice calls, you 

must attach a telephone and/or answering machine to 

the unit.

Power Cord

(to outlet)

USB—to—Parallel Cable

(to computer)

Connect the power cord to the MultiPASS and to

a wall outlet. The MultiPASS has no power switch. 

The power is on as long as the system is plugged in.

ADF

Jacks on

MultiPASS

The MultiPASS unit has three telephone jacks (located 

on the left side of the unit) that will accept standard 

line connections. 

L

Use the bottom       jack to connect the wall 

jack to the MultiPASS with the supplied 

line cord (unless connected with Caller ID). 

The other two jacks are pass-through ports

to connect other devices to the MultiPASS 

and your telephone service. Select from the

options in the diagram below to configure 

your telephone device to work in 

conjunction with your MultiPASS. 

MultiPASS Only

Recommended Device Connections                              Receive Modes

Fax Only 
or DRPD

Wall Jack

MultiPASS and Telephone

Fax/Tel, DRPD,
or Manual

Wall Jack

MultiPASS and Answering Machine

Ans.Machine

Wall Jack

Telephone

Answering
  Machine

MultiPASS, Answering Machine and Telephone

Ans.Machine

Wall Jack

Answering
  Machine

Telephone

MultiPASS and PC Modem

Fax Only
or DRPD

Wall Jack

PC

MultiPASS, PC Modem and Telephone

Wall Jack

PC

Telephone

MultiPASS, PC Modem and 
Answering Machine

Wall Jack

PC

Telephone

Answering
 Machine

MultiPASS, PC Modem, Answering 
Machine and Telephone

Wall Jack

PC

If you use Caller ID with any of these 

configurations, place the Caller ID device 

between the MultiPASS and the wall jack.