Canon MF7460 Verweisanleitung

3-12

To return the copy ratio to 100%, press [Direct].
To cancel all settings and return the machine to the Standard 
mode, press   (Reset).

You can set the machine to automatically select the appropriate 
copy ratio based on the size of the original and the selected copy 
paper. The same copy ratio is used for the horizontal (X) and vertical 
(Y) axes. The available copy ratios are from 50% to 200%.

You cannot use the Auto setting on the Copy Ratio screen with the 
Automatic Paper Selection mode.
You cannot copy highly transparent originals, such as transparencies, 
using the Auto setting on the Copy Ratio screen. Use the Preset Zoom or 
Zoom by Percentage mode instead.
To use the Auto setting on the Copy Ratio screen, your originals must 
conform to one of the standard paper sizes:

11" x 17", LGL, LTR, LTRR, STMT or STMTR (You can only place an STMTR 
original on the platen glass.)

–
–

–

–

–

–

Make sure that you select a paper size other than [Auto]. If you do 
not select a paper size, the copy ratio is automatically set to match 
the size of the paper loaded in Paper Drawer 1.

To return the copy ratio to 100%, press [Direct].
To cancel this setting, press [Copy Ratio], then [Auto].
To cancel all settings and return the machine to the Standard 
mode, press   (Reset).

–
–
–