Canon MP800R Installationsanleitung

Confirming the Setup Environment

When setting up the machine to be used over wireless LAN, the machine’s network settings are 
configured to match those of the access point. Therefore, if you are using wireless LAN, we 
recommend that you confirm the necessary information on the access point before entering the 
setup process. Check and fill in the table below.

*1

In the stealth mode, an access point hides itself by not broadcasting its SSID. The client must 
specify the SSID set to the access point to detect it. In Macintosh, the stealth mode is called a 
“closed network”.

*2

Any rejection is a feature of an access point to hide itself from and/or reject connection with clients 
whose SSID/network name is set to “ANY”.

*3

This machine supports the methods below. If you are using another method, change the WPA/
WPA2 settings on the access point and computers to match these.
Authentication method: WPA-PSK (WPA Personal) or WPA2-PSK (WPA2 Personal)
Encryption method: TKIP or AES

*4

If Client-to-Client Blocking is enabled, clients are not allowed to communicate with other clients 
associated with the same access point.

z If Stealth (closed network) or ANY-Rejection feature is enabled 

We recommend you to disable it before entering setup.

z If MAC address filtering is enabled

You must register the machine’s MAC address to the access point before entering setup. To 
confirm the MAC address of the machine, print the machine’s network information. See 

“Printing 

Out Network Setting Information” on page 72

.

SSID/network name

Stealth/closed network

*1

 Disabled

 Enabled

ANY-Rejection

*2

 Disabled

 Enabled

Radio channel

 Automatic

 Channel   (     )

: The machine can communicate in channels 1 to 11.

Encryption

 Disabled

 WEP Enabled

key (                                                             )

 WPA or WPA2 Enabled

*3

key (                                                             )

Encryption (TKIP · AES)

MAC address filtering

 Disabled

 Enabled

IP address filtering

 Disabled

 Enabled

Client-to-Client Blocking

*4

 Disabled

 Enabled

For information on how to confirm the settings of the access point, refer to the manual provided with the 
access point or contact its manufacturer.