Canon MP800R Installationsanleitung

Setting Up the Machine and the Computer (Windows)

When the screen shown on the right appears, 
remove the USB cable, and click [Next].

The network connection between the machine and 
the computer is now successfully established.

To confirm the Setup Results, click [View Setup 
Results].

To change the port name, click [Set Port Name] on 
the [Setup Results] dialog box. For details, see 

“Changing the port name” on page 69

.

Place the machine in the location where you will use it, then turn it on.

Click [Next] in the [Connection Performance 
Measurement] dialog box.

Measuring of the communication performance 
starts, and the results are displayed.

Confirm the measurement results, then click 
[Finish].

Ensure that 

 is displayed in [Connection 

Performance between the Printer and the Access 
Point].

If “Unsafe Removal of Device” is displayed, click [OK].

Measuring takes a few minutes. You can cancel 
measuring by clicking [Cancel].
You can also execute the same measurements by 
using the Canon IJ Network Tool.

z If any symbol other than 

 is displayed, refer to 

displayed comments and Help for improving the 
status of communication link.

z To check whether the new location is better, click 

[Remeasurement] after moving the machine. 
Measurement of the communication status is 
performed again.

z When any message on [Overall network 

performance] appears in the measurement results, 
rearrange the machine and other network devices 
following the instructions on the screen.

For customers in the United States
When the online registration dialog box appears, follow the on-screen instructions to register your product.