Canon MP800R Installationsanleitung

Setting Up the Machine and the Computer (Windows)

When the [Setup Preparations] dialog box is 
displayed, confirm that preparation is 
complete, then click [Next].

Select [Wired LAN].

When the screen shown on the right appears, 
connect the machine to the network devices 
such as hubs with a LAN cable and click 
[Yes]. Then click [Next].

Setup automatically detects the machine.

The MP800R connected with the USB cable is detected automatically. 

If the machine was not detected, the [Set Printer IP 
Address] dialog box appears. Ensure that the 
machine is on and connected to your computer with 
a USB cable, then click [Connect] to retry detection. 
If the machine is still not detected, refer to 

“The [Set 

Printer IP Address / Printer IP Address Setup] 
dialog box is displayed during setup” on page 64

.

If the machine’s network settings are already 
configured, the [Setup Environment Confirmation] 
dialog box appears asking you for confirmation to use 
the machine with the current settings. You can 
proceed with the setup using the current network 
settings. To do so, click [Use as is]. To reconfigure the 
network settings, click [Reconfigure].

z If the wireless LAN settings are already configured, 

the [Note on Network Settings] dialog box is 
displayed. Generally, click [Wired connection only] 
to enable only wired LAN. 

z If the machine’s network settings have been set 

before, the [Printer Network Setup] dialog box is 
displayed. For details, see 

“The [Printer Network 

Setup] dialog box is displayed during setup” on 
page 66

.

Connection may vary depending on your network 
setup.