Canon MP800R Installationsanleitung
5
Preface
EN
GLIS
H
Setup Outline
Follow the steps below to start using the machine.
Step 1
Confirming Your Connection Type. (see
page 6
)
There are several ways to connect the machine and your computer.
Decide on a connection type that matches your network setup.
Step 2
Setting Up. (see
page 11
)
Place the machine and install the print head and the ink tanks.
Even though the machine is intended to be used over a wireless or wired LAN, it must be placed
temporarily near the computer to do the setup via a USB cable.
Step 3
Confirming the Setup Environment. (see
page 19
)
Setup procedure differs depending on the type of your connection.
Make sure you know which setup procedure to perform.
Step 4
Set Up the Machine and the Computer.
(for Windows
®
see
page 23
, for Macintosh
®
see
page 39
)
Install the driver to use the machine and the software to connect it to a network.
If using the machine over a wireless or wired LAN, place it in the location where you will use it as
instructed during setup.
Setup complete
The machine is now ready for use.