Canon MP800R Installationsanleitung

Troubleshooting

No printer is detected 
after the network 
settings are changed 
in Windows 

Wait until the IP address is assigned to the computer. You may need to 
restart your computer. When you are using Windows Me or Windows 
98, you need to restart the computer. Search for the machine again 
after confirming a valid IP address is assigned to the computer.

The [Access Points] 
dialog box is 
displayed during 
setup

The [Access Points] dialog box is displayed when: 

– No access point is detected. 
– Multiple access points are detected.
– Entry of a network key is necessary to communicate with the target access point.

Select the target access point, then perform necessary operation such 
as setting of encryption.

If you want to specify access point manually, click [Manual Setup] in 
the [Access Points] dialog box. Enter the settings for the target access 
point in the [Manual Setup] dialog box, then click [Connect]. The target 
access point is searched with the specified settings.
For changing settings of the access point, refer to the manual provided 
with the access point or contact its manufacturer.

If you connect to a network that is not protected with security 
measures, there is a risk of disclosing data such as your personal 
information to a third party. 

Enter the SSID set to the access point. The SSID is case sensitive. 
When using AirPort, enter the network name (SSID) in alphanumeric 
characters.

SSID is also called ESS-ID. For details, refer to the manual provided 
with your access point or contact its manufacturer.