Canon MP800R Installationsanleitung

Troubleshooting

Checking the IP 
address or the MAC 
address of the 
computer 

To check the IP address or MAC address assigned to the computer, 
follow the procedure below. 

z When using Windows XP/Windows 2000

1 From the [Start] menu, select [(All) Programs], [Accessories], and 

then [Command Prompt].

2 Enter “ipconfig /all” and press the [Enter] key. The IP addresses 

and the MAC addresses of the network devices installed in your 
computer are displayed. When the network device is not connected 
to the network, the IP address is not displayed.

z When using Windows Me/Windows 98

1 From the [Start] menu, select [Run].

2 Enter “winipcfg” in the [Name] text box and click [OK]. 

Select the network device to display the IP address and the MAC 
address.

1 From the Apple menu, select [System Preferences], and then 

[Network].

2 From the [Show] pop-up menu, select [Built-in Ethernet].

Selecting the [TCP/IP] buttons displays the IP address. Selecting 
[AirPort] (or [Ethernet] in the case of a wired LAN) displays the MAC 
address.

Checking the network 
setting information 

See 

“Printing and Initializing Network Settings” on page 72

 to print out 

machine setting information. If it fails, use Canon IJ Network Tool or 
Network Configuration to confirm the network settings from the 
computer.

Confirming the 
version of Windows 
XP

If you are using Windows XP, you may need to confirm your system 
version to configure the network setting of your computer.

To check the version of Windows XP, follow these steps.

1 Right click [My Computer] from the [Start] menu and select 

[Properties].

[System Properties] will be displayed.

2 Confirm that the [General] tab is displayed.

3 Confirm your Windows XP version under [System].