Canon MP510 Anleitung Für Quick Setup

• Please confirm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the machine with your computer.

QT5-0453-V02

a

 Place the machine on a flat and horizontal 

surface, and do not place any objects in front 

of the machine. Open the Front Feeder, and 

extend the Paper Output Support and the Paper 

Support.

b 

Plug the power cord in the back of the machine 

and connect the other end to the wall outlet.

c 

Open the Operation Panel, then press the 

OFF button to turn on the machine.

d

 Use the { or } button on the Operation Panel to 

select the language for the LCD, then press the 

OK button. 

(1)  Press the { or } 

button to select the 

language.

(2)  Press the 

OK 

button.

1

in “Troubleshooting” of the User’s Guide on-screen manual to 

If the message <Install the print head and set the ink tank.> 

appears, go to 

e

.

e 

Lift the Scanning Unit (Printer Cover) open, and 

set the Scanning Unit Support to hold the cover. 

The Print Head Holder moves to the center.

Scanning Unit (Printer Cover)

f 

Write down the serial number located inside 

the machine. You will need this to register your 

product.

Serial Number Location

3

2

a 

Remove the Print Head from its package.

b 

Remove the orange protective cap from the Print 

Head and discard it.

Protective Cap

Electrical Contacts

Print Head Nozzles

Do not touch the print head nozzles and the electrical contacts.

c 

Firmly raise the Print Head Lock Lever until it 

stops.

d 

Insert the Print Head.

Do not touch!

e 

Lower the Print Head Lock Lever carefully.

a 

Peel back the orange tab completely and remove 

the plastic wrapper from the ink tank.

If the orange-colored protective film is not removed 

completely, problems with printing may occur.

b 

Twist off and discard the orange protective cap 

located on the bottom of the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

c 

Insert the ink tank into the right-hand slot and 

press the   mark on the ink tank until it clicks 

into place.

d 

Make sure the ink lamp lights red.

Refer to the color guide on the 

Print Head Lock Lever.

e 

Lift the Scanning Unit (Printer Cover) slightly to 

set the Scanning Unit Support back to its original 

position, and then gently close the Scanning Unit 

(Printer Cover).

This machine offers two paper sources to load printing 

paper; the Auto Sheet Feeder, found at the top of the 

machine, and the Front Feeder, found at the front of the 

machine.

• At purchase, the machine is set to feed from the Auto Sheet 

Feeder.

• You can load A4, Letter, or B5-sized plain paper in the Front 

Feeder. When using any other type of paper, load it in the 

Auto Sheet Feeder.

Auto Sheet Feeder

Front Feeder

a 

Load the paper in the Auto Sheet Feeder 

with the print side facing UP.

b 

Align the paper stack against the Cover 

Guide on the right side of the Paper Support.

c 

Pinch the Paper Guide and slide it against 

the left side of the paper stack.

Paper Guide

Print side facing UP.

Cover Guide

a 

Load the paper in the Front Feeder with the 

print side facing DOWN and the leading 

edge to the far side.

b 

Align the paper stack against the right edge 

of the Front Feeder.

c 

Align the near and the left edges of the 

paper with the Paper Size Mark.

d 

Pinch the Paper Guide and slide it against 

the left side of the loaded paper stack.

Paper Guide

Print side facing DOWN.

Paper Size Mark

For details, refer to the Quick Start Guide.