Canon MP970 Anleitung Für Quick Setup

Please confirm the included items against the illustration printed on the lid of the packing box.

A USB cable is necessary to connect the machine with your computer.

•

•

1

a

 Unlock the Scanning Unit (Printer Cover).

(1)  Open the Document Cover.
(2)  Move the Scanner Lock Switch towards the release mark to 

unlock the Scanning Unit (Printer Cover).

(1)

(2)

Scanning Unit 

(Printer Cover)

b

 Plug the power cord in the back of the machine 

and connect the other end to the wall outlet. 

Next, open the Sheet Feeder Cover, pull out the 

Paper Support and the Extension, then open the 

Paper Output Tray and the Extension.

Document Cover

Extension

Paper Support

Sheet Feeder 

Cover

Paper Output Tray

Extension

c

 Open the Operation Panel, then press the 

OFF button to turn on the machine.

The machine will initialize. Wait until the 

Power lamp stops 

flashing and remains lit blue.

d

 Use the { or } button on the Operation Panel to 

select the language for the LCD, then press the 

OK button.

(1)  Press the { or } 

button to select the 

language.

(2)  Press the 

OK 

button.

Once the message 

tank.” appears, go to 

e

.

e

 Lift the Scanning Unit (Printer Cover) until it locks 

into place. The Print Head Holder moves to the 

center.

f

 Write down the serial number located inside 

the machine. You will need this to register your 

product.

Serial Number Location

a

 Remove the Print Head from its package.

b

 Remove the orange protective cap from the Print 

Head and discard it.

Protective Cap

Print Head Nozzles

Electrical Contacts

c

Firmly raise the Print Head Lock Lever until 

it stops. The Print Head Lock Lever may feel 

heavy.

d

Insert the Print Head.

Do not touch!

e

 Push the Print Head to hold it in place, and lower 

the Print Head Lock Lever.

3

For the ink tanks compatible with this machine, refer to the back 

cover of the Quick Start Guide.

a

 Pull the orange tape in the direction of the arrow 

to peel off the protective film and remove the film 

completely.

If the air hole is blocked with the remaining film, ink 

may leak out or may not eject properly.

b

 Twist off and discard the orange protective cap 

located on the bottom of the ink tank.

Electrical Contacts

Ink Port

Protective Cap

Do not press!

c

 Insert the ink tank into the right-hand slot and 

press the   mark on the ink tank until it clicks 

into place.

d

 Make sure the ink lamp lights red.

Refer to the color 

guide on the Print 

Head Lock Lever.

e

 Close the Scanning Unit (Printer Cover).

a

 Pinch the Paper Guide and slide it to the left end.

Paper Support

Extension

Paper Guide

b

 Load a sheet of A4 or Letter-sized plain paper 

into the Rear Tray, align the paper with the Cover 

Guide on the right side, then slide the Paper 

Guide against the paper.

Paper Guide

Cover Guide

Print Side

c

Make sure that 

Yes is selected in the message 

requesting head alignment, then press the 

OK 

button.

Print Head alignment takes about 6 minutes to complete. Do not 

start another operation until the machine has stopped making 

operating noises.

The pattern is printed. And Print Head is aligned 

automatically.

The pattern is printed in black and blue.

When Automatic Print Head Alignment cannot be executed 

correctly, the message “

Auto head align has failed.” is displayed 

on the LCD. Refer to “An Error Message is Displayed on the LCD” 

in the Quick Start Guide.

•

•

2

4

When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.