Canon MX870 Netzwerkanleitungen

This manual mainly describes problems you may encounter when setting up a network, and the possible 

causes and solutions. 

Find a description related to your problem and follow the solution. 

If you cannot find a description for your problem or if you encounter a problem after setup, refer to the on-

screen manual: 

Basic Guide/Advanced Guide. 

Screens are based on Windows Vista Ultimate and Mac OS X v.10.5.x.

Names of functions, etc. may differ from this manual depending on your network device (router, access 

point, etc.) or application software.

•

The Target Access Point is Not Displayed (Detected)

P.1

Failed to connect to the access point. is Displayed

P.2

The Machine is Not Displayed (Detected)

Cannot connect. Multiple access points are enabled. is Displayed
Connection failed. is Displayed

P.5
P.5

P.3

Multiple access points with the same name exist. is Displayed

P.2

P.5

P.6

Check Printer Settings dialog box is Displayed

Access point was not detected. is Displayed

The directly entered access point was not detected. is Displayed

P.4

The device may not be able to connect to the network is Displayed

P.3

Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security 

Protocol (encryption standard), and Network Key
The Machine is Not Detected after the Network Environment is Changed

P.7

P.7

Specifying the Machine's IP Address (IPv4 only)

P.11

Restoring the Machine's Default LAN Settings to Perform Setup Again

P.11

Entering the Access Point's Wireless LAN Settings Directly on the Machine

P.9

Character Entry

P.8

The following symbols are used in this manual.

Description for Windows users.

Description for Macintosh users.

Instructions as notes for operation or additional explanations.

Description for wireless connection.

Description for wired connection.