Canon MX870 Netzwerkanleitungen

A

Is the privacy separator feature enabled on the access point?

Disable the privacy separator feature.

For details on how to change the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

For details on how to check the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

When obtaining an IP address automatically, make sure that the DHCP function of the 

network device (router, access point, etc.) is active.

For details on how to check settings of the network device, refer to the manual supplied with the 

network device or contact its manufacturer.

•

Activate the DHCP function of the network device, then click 

Update (A).

For details on how to change settings of the network device, refer to the manual supplied with the 

network device or contact its manufacturer.

•

A function to restrict communication of network devices with specific IP addresses, preventing them from 

connecting to the network.

A function to prevent communication between multiple wireless devices (such as computers and printers) 

connected to an access point.

A function to automatically assign required information (IP address, etc.) to computers, printers or other 

devices connected to the network.

(* Wireless connection only)

Check Printer Settings dialog box is Displayed

The message appears when the machine cannot be 

detected.

Is the machine connected to a network?

To confirm the connection status, press the 

Setup button, then using the { } [ ] and OK 

buttons, select 

Device settings > LAN settings > Confirm LAN settings > WLAN setting list or 

LAN setting list. Make sure that Connection is set to Active.

•

For a wireless connection, make sure that you follow 

Check 1, 2, 3, 4, 5 and 6 of "Connection Checklist" on 

page 12, then click 

Back (A).

If the machine is not connected to a network, perform setup again by following the 

procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed 

manual: 

Getting Started.

Is the IP filtering feature enabled on the network device (router, access point, etc.)?

For details on how to check settings of the network device, refer to the manual supplied with the 

network device or contact its manufacturer.

•

Set the network device to accept the IP address of the machine.

For details on how to change settings of the network device, refer to the manual supplied with the 

network device or contact its manufacturer.

•

To check the IP address of the machine, press the 

Setup button, then using the { } [ ] and 

OK buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting 

list or LAN setting list, then check IP address.

•

For a wired connection, make sure that you follow 

Check 1, 2, 3, 7 and 8 of "Connection Checklist" on 

page 12, then click 

Back (A). 

Proceed with the setup.

A numerical identification assigned to each computer or network device connected to a network.