Canon i475D Installationsanweisungen

FPO

Carefully remove all items from the box.

i475D Series

Desktop Photo Printer

Documentation  

and Software Kit

Power Cord

i475D Series Print Head

NOTE: The printer will perform a print  
head cleaning after the cover is closed.

Paper Rest

Ink Tanks

BCI-24 Black                      BCI-24 Color

Open the output tray, then open the front  
cover. The print head holder automatically  
moves to the center.

Press the Power button. The printer will  
initialize.

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

Remove all shipping tape from the front 
and back of the printer. 

Write down the serial number located to  
the right of the print head holder. You  
will need this later to register the product.

Power

Lamp

Power

Button

Shipping
Tape

Serial Number

Output Tray

Front Cover

Output 

Tray

Paper Rest

Remove the black ink tank (BCI-24 Black) 
from its package and pull off the orange  
protective cap.

Insert the black ink tank into the slot on  
the right, then push in until the ink tank  
clicks into place. 

Repeat the procedure for the color ink  
tank (BCI-24 Color), inserting it into the  
remaining slot.

Close the front cover, attach the paper rest  
and pull out the output tray.

Protective Cap

Click

NOTE: Avoid ink at the bottom of the tank.

IMPORTANT: For correct printer  
operation, make sure ink tanks  
are secure in slots.

Paper
Guide

USB Cable

USB Port

IMPORTANT: Be sure printer is  
off before continuing, or the  
computer will attempt to install  
the printer driver before the  
printer is ready.

Connect one end of a USB cable to the  
computer, the other to the printer.

Pinch the paper guide and slide it to  
the left. Load a sheet of blank paper  
in the paper rest. Slide the guide  
toward the left edge of the paper.

Turn the printer off.

Click

Remove the print head from its package.

NOTE: Do not touch the electrical  
contacts or the print head nozzles.

Raise the gray lock lever on the printer.

Slide the print head into the holder until  
it is securely seated.

Do not press it down.

Lower the lever until it clicks into place.

Remove the orange protective cap. 

Electrical

Contacts

Tear at notch to open

Print Head  

Nozzles

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

1

2

3