Canon i250 Anleitung Für Quick Setup

350/i250

Connect one end of a USB cable (not  
included) to the computer, the other to  
the printer.

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet.

USB Port

USB Cable

Protective cap

Insert the black ink tank (BCI-24 Black)

k

into the slot on the right. Press down  
until the ink tank locks into place

Repeat the procedure for the color ink  
tank (BCI-24 Color), inserting it into the  
remaining slot. Close the front cover.

Pull out the paper rest and the output 
tray (i350 only).

Remove the black ink tank (BCI-24 Black)
from its package and pull off the orange  
protective cap.

NOTE: To avoid spilling ink, do not touch  
the bottom of the tank once you have  
removed the protective cap.

Click

Remove the print head from its package.

Raise the gray lock lever on the printer.

Slide the print head into the holder until 
it is securely seated.

Lower the lever until it locks into place.

Tear at notch to open

Electrical

contacts

NOTE: Do not touch the electrical contacts
on the back and bottom of the print head.

Remove the orange protective cap.

Open the front cover. Remove the packing 
material from the print head holder.

Remove all shipping tape from the printer.

NOTE: The serial number is located to the

to register the product.

Shipping Tape

Serial number

Print head

holder

Packing

material

Carefully remove all items from the box.

50 Series

Color Bubble Jet Printer

Documentation 

and Software Kit

Power Cord

i350/i250 Series Print Head

Ink Tanks

BCI-24 Color

NOTE: These instructions are for both the 
i350 Series Color Bubble Jet and the i250
Series Color Bubble Jet printers. Some of 
the graphics used may vary slightly from 
the product you have purchased.

NOTE: USB cable not included.