Canon i850 Installationsanweisungen
Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Print Head
Photo Printer
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
Parallel Port
Secure
Wire Clips
Parallel Cable
Continue with Step 6
on side two.
on side two.
USB Port
USB Cable
(IEEE 1284 compliant)
For USB Cables:
For Parallel Cables:
Turn the printer off.
Connect one end of the USB cable to
the computer, the other to the printer.
the computer, the other to the printer.
Turn the printer off.
Connect one end of the parallel cable to
the computer, the other to the printer.
the computer, the other to the printer.
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
1
2
1
2
Parallel Cable
Protective cap
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
(Refer to the color guide on the print head.)
Press down until the ink tank clicks into
place.
place.
Peel back the orange tab and completely
remove the plastic wrapper from the yellow
ink tank (BCI-3eY).
remove the plastic wrapper from the yellow
ink tank (BCI-3eY).
Twist off and discard the orange
protective cap.
protective cap.
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
Insert the remaining three ink tanks into
their assigned slots.
their assigned slots.
Close the front cover. Open and pull out the
paper rest and the output tray.
paper rest and the output tray.
1
2
3
4
5
Remove the print head from its package.
Print Nozzle
Electrical Contacts
Lower the gray lock lever until it locks
into place.
into place.
Raise the gray lock lever.
Gently slide the print head into the holder.
The print head will rest at a slight angle.
The print head will rest at a slight angle.
Do not press it down.
Turn the print head over, then remove
the orange protective cap.
the orange protective cap.
NOTE: Do not touch the electrical contacts.
5
4
3
1
2
Shipping Tape
Remove the shipping tape from the front
and sides of the printer.
and sides of the printer.
2
1
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
printer and connect the other end to a
power outlet.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
the right of the print head. You will need
this later to register the product.
Press the POWER button.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
automatically moves to the center. Remove
the protective tape.
3
Protective tape
Serial number
Carefully remove all items from the box.
1
Documentation
and Software Kit
Power Cord
Ink Tanks
BCI-3eC
Cyan BCI-3eM Magenta
BCI-3eBK Black BCI-3eY Yellow
a NOTE: The “i850 Setup Software & User’s
Guide” CD-ROM contains printer drivers,
software applications and electronic manuals.
Guide” CD-ROM contains printer drivers,
software applications and electronic manuals.
Photo Printer
Print Head